TERM Isolation Joint | Termite Barrier
TERM Isolation Joint Barrier is a “peel and stick” termite barrier composite used for sealing isolation joints (cold joints) before pour of a new slab which butts against an interior slab. Ideally installed above any re-bar on the existing concrete side of the new pour. After new concrete is placed, a UV stable sealant or caulking should be used on top of the joint.
Features & Benefits
Non-structural barrier
Acts as a barrier to termites entering the structure through cold joints
Consists of a laminated elastomeric membrane which has a TERM Sealant Barrier adhesive on both sides
Total thickness is a nominal 3/8”
Roll height is 2” (.102 cm)
Length is 4’ (2.44 m)
Embedded within the TERM Isolation Joint Barrier is a 4” wide stainless steel screen, with aperture opening of 0.018”
Adhesive faces are covered by disposable treated release sheet, which can be peeled away
