TERM FLASHING MOISTURE | TERMITE BARRIER
| TERM Flashing | Termite Barrier is applied where the horizontal concrete slab intersects with exterior sheathing. This area is a frequent entry point for termites which have come up on the outside of the foundation wall. TERM Flashing | Termite Barrier has 30 days of UV protection before it should be covered. TERM Flashing | Termite Barrier is a flexible membrane which will keep air/moisture and all pests excluded, when properly constructed as part of the building envelope, acts as a barrier to all insects. The use of a primer such as Polyguard's 650 WB Liquid Adhesive is recommended for superior adhesion of all flashing tapes. |
Features & Benefits
Strong, pliable, self-adhesive sheet flashing with special silver foil facing
4-mil high density polyethylene film bonded to 36 mils of sealant = 40 mils thick
Formulated for low temperature application down to 30°F (-1°C)
For flashing and seam application, available roll widths are 4 6". 9" 12” & 18”
All rolls are 75’ long
NFPA 285 rated
The only physical termite barrier with over 20 years of testing and an evaluation report by the ICC (International Code Council) AC 380 ESR 3632
30-day UV exposure
Product Resources
TERM | Flashing - Data Sheet
TERM | Flashing Moisture Termite Barrier - Product Overview
TERM Flashing Moisture | Termite Barrier - Detail - Below Grade Masonry (TM2)
TERM Flashing Moisture I Termite Barrier - Detail TFR01
